Acer beTouch E140, User Manual

Page: 10 / 56

10
Place the battery into the battery compartment,
lining up the battery connectors with those at
the bottom of the compartment.
Align the tabs on the battery cover into the slots
on the phone. Carefully press the the cover until
the clips on the side of the cover click in place.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Charging the battery
For initial use, you need to charge your smartphone for eight hours. After that
you can charge it each day to recharge the battery to full capacity.
Connect the AC adapter cord to the micro USB connector on your smartphone.
Removing the battery
1
2
Open the battery compartment as shown in
“Installing the battery“ on page 9. Lift the battery
out of the compartment using the clip on the top of
the battery.
Replace the battery cover as described above.
Installing a SIM and microSD Card
To take full advantage of your smartphone’s telephony capabilities, you must
install a SIM card. The SIM card holder is located at the bottom of the battery
bay.
Additionally, you may wish to increase your smartphone’s storage by inserting a
microSD Card into the slot provided. This is next to the SIM card slot.
1. Turn off the phone by pressing and holding the power button.