53
Installing an expansion card
I/O interface
The AT310 F1 has five PCI bus slots with four separate bus segments,
namely:
•
PCI1 — PCI Express
®
x8 slot (x8 bandwidth)
•
PCI2 — PCI Express
®
x4 slot (x1 bandwidth)
•
PCI3 — PCI Express
®
x16 slot (x8 bandwidth)
•
PCI4 — PCI Express
®
x8 slot (x4 bandwidth)
•
PCI5 — PCI slot (32-bit/33 MHz, 3.3 V)
Note: PCI1 will be disabled and signal is switched to PCI3 slot
when a x16 PCI device is plugged in the PCI3 slot.
To install an expansion card:
1
Perform the pre-installation instructions described on page 28.
2
Remove the side panel described on page 36.
3
Lay the server on its side (components showing).
4
If necessary, remove any cables that prevent access to the PCI slot.
5
Locate an empty expansion slot that is compatible with the
specification of the card you intend to install.
Summary of Contents for AT310 F1 Series
