Chapter 3
35
To disassemble the AT2001, you need the following tools:
T
Wrist grounding strap and conductive mat for preventing electrostatic discharge.
T
Wire cutter.
T
Phillips screwdriver (may require different size).
NOTE:
The screws for the different components vary in size. During the disassembly process, group the
screws with the corresponding components to avoid mismatches when putting back the components.
Machine Disassembly and Replacement
Chapter
2
Summary of Contents for AT2001
