Power Saving
While VGA is selected to be input, this LCD TV is equipped with a power-management according to
VESA DPMS. There is a delay of 5 seconds before the transition from On-state to power saving state to
avoid unintentionally entering of a power saving state during display resolution and timing mode changes.
During the period of delay, the LED shall indicate green
color and OSD will show “ POWER SAVE “.
Transition from any power saving state to another can be instantaneous. The recovery from Off-state
requires no manual power on.
Mode
Hsync Vsync Video
Power
Indication
Recovery time
Power-On On
On
Active <63W
Green
--
Stand-by
Off
On
Off
<5W
Amber
<3s
Suspend
On
Off
Off
<5W
Amber
<3s
Off-state
Off
Off
Off
<5W
Amber
<3s
Power off
×
×
×
<5W
Dark
Turn on <5s
Sync on means: normal operation
Sync off means: Hsync: f<1kHz, duty cycle>25%, Vsync: f<10Hz,duty cycle>25%
The power-consumption is valid over the specified voltage and frequency range.
Power comsuption is measured from AC source.
There are no power saving modes for TV, AV1, S1, SCART inputs.
Summary of Contents for AT2001
