Acer Aspire Z5771 Service Manual Download Page 45

Page: 45 / 220

System Utilities

2-15

AMI UEFI BIOS Flash SOP for DOS

Flash UEFI BIOS SOP for DOS,

1. Please make a DOS bootable device.

2. Copy BIOS folder (ex: aParis-H61_D01 folder) into DOS bootable device.

3. Boot to DOS mode and enter the BIOS folder.

4. Enter to the DOS folder under BIOS folder.

5. Flash Method.

- For end-user ONLY. Currently, ALL ODMs should NOT use it to flash SBIOS.

It will cause unexpected problem since some BIOS block data maybe different between old
and new BIOS.

- It will keep DMI and setup settings.

- QTC team can simulate user's behavior by using it.

1) Execute “

BIOS_DOS.bat

” file.

Summary of Contents for Aspire Z5771





























































































































































































































Search results

Summary of Contents for Aspire Z5771

Reviews:

Related manuals for Aspire Z5771

Brands by name

Popular brands

Acer Aspire Z5771, Service Manual

Search results

Summary of Contents for Aspire Z5771

Reviews:

Related manuals for Aspire Z5771

Brands by name

Popular brands