Chapter 4
61
This chapter provides instructions on how to troubleshoot system hardware problems.
Hardware Diagnostic Procedure
IMPORTANT:
The diagnostic tests described in this chapter are only intended to test Acer products. Non-Acer
products, prototype cards, or modified options can give false errors and invalid system
responses.
1.
Obtain the failing symptoms in as much detail as possible.
2.
Verify the symptoms by attempting to recreate the failure by running the diagnostic tests or repeating the
same operation.
3.
Refer to the table below to determine which corrective action to perform.
Problem
Symptom
Section to Refer to
Power failure
The power indicator does not light up
or stay lit.
“Power System Check” on page 62
POST failure
POST does not complete. No beep
or error codes issued.
“POST Error and Beep Codes” on page
63.
POST detects an error and displayed
messages on screen.
System Troubleshooting
Chapter 4
Summary of Contents for Aspire X1300
