Chapter 4
67
76h
(Optional Feature) Enter AWDFLASH.EXE if: -AWDFLASH.EXE is found in floppy
drive. -ALT+F2 is pressed.
77h
Detect serial ports & parallel ports
78h
Reserved
79h
Reserved
7Ah
Detect & install co-processor
7Bh
Reserved
7Ch
Init HDD write protect
7Dh
Reserved
7Eh
Reserved
7Fh
Switch back to text mode if full screen logo is supported.
q
If errors occur, report errors & wait for keys
q
If no errors occur or F1 key is pressed to continue:
q
Clear EPA or customization logo
80h
Reserved
81h
Reserved
E8POST.ASM starts
82h
1 Call chipset power management hook
2 Recover the text fond used by EPA logo (not for full screen logo)
3 If password is set, ask for password
83h
Save all data in stack back to CMOS
84h
Initialize ISA PnP boot devices
85h
1 USB final Initialization
2 Switch screen back to text mode
86h
Reserved
87h
NET PC: Build SYSID Structure
88h
Reserved
89h
1 Assign IRQs to PCI devices
2 Set up ACPI table at top of the memory
8Ah
Reserved
8Bh
1 Invoke all ISA adapter ROMs
2 Invoke all PCI ROMs (except VGA)
8Ch
Reserved
8Dh
1 Enable/Disable Parity Check according to CMOS setup
2 APM Initialization
8Eh
Reserved
8Fh
Clear noise of IRQs
90h
Reserved
91h
Reserved
92h
Reserved
93h
Read HDD boot sector information for Trend Anti-Virus code
POST Code (Hex)
POST Routine Description
Summary of Contents for Aspire X1300
