Chapter 2
33
PnP/PCI Configuration
Parameter
Description
Options
Reset Configuration Data
In case a conflict occurs after you assign the IRQs or
after you configure your system, you can enable this
function to allow your system to automatically reset
your configuration and reassign the IRQs, DMAs and I/
O address.
Disabled
, Enabled
Resources Controlled By
if this option is set to Auto, the BIOS automatically
selects all the devices Plug & Play compatible
specifying their Interrupt and DMA. If you selected the
manual setting, you can specify the device for each
interrupt it is assigned to (ISA o PCI); this is the same
for DMAs.
Auto (ESCD)
, Manual
PCI/VGA Palette Snoop
Enable this option to correct screen color shifts, when
there is a combination of VGA cards, accelerator cards,
or MPEG cards present.
Disabled
, Enabled
Reset Configurat
i
on Data
[
Disabled]
Resources Controlled By
[Auto(ESCD)]
X IRQ Resources
Press Enter
PCI/VGA Palette Snoop
[Disabled]
ESCD) when you exit
Setup if you have
installed an new add-on
and the system
reconfiguration has
caused such as serious
conflict that the OS
cannot boot
Configuration Data
Phoenix - Award BIOS CMOS Setup Utility
PNP/PCI Configurations
Select Enabled to
Item Help
Menu Level
X
Default is Disabled.
F5:Previous Values F7:Default Settings
KLIJ
:Move Enter: Select +/-/PU/PD :Value F10:Save ESC:Exit F1:General Help
reset Extended System