Chapter 1
17
Power Management Function ( ACPI support function)
Device Standby Mode
q
Independent power management timer for hard disk drive devices
(0-15 minutes, time step=1 minute).
q
Hard disk drive goes into Standby mode (for ATA standard interface).
q
Disable V-sync to control the VESA DPMS monitor.
q
Resume method: device activated (Keyboard for DOS, keyboard & mouse for Windows).
q
Resume recovery time: 3-5 sec.
Global Standby Mode
q
Global power management timer (2-120 minutes, time step=10 minute).
q
Hard disk drive goes into Standby mode (for ATA standard interface).
q
Disable H-sync and V-sync signals to control the VESA DPMS monitor.
q
Resume method: Return to original state by pushing external switch button, modem ring in,
keyboard and mouse for APM mode.
q
Resume recovery time: 7-10 sec.
Suspend Mode
q
Independent power management timer (2-120 minutes, time step=10 minutes) or pushing external
switch button.
q
CPU goes into SMM.
q
CPU asserts STPCLK# and goes into the Stop Grant State.
q
LED on the panel turns amber colour.
q
Hard disk drive goes into SLEEP mode (for ATA standard interface).
q
Disable H-sync and V-sync signals to control the VESA DPMS monitor.
q
Ultra I/O and VGA chip go into power saving mode.
q
Resume method: Return to original state by pushing external switch button, modem ring in,
keyboard and mouse for APM mode.
q
Return to original state by pushing external switch button, modem ring in and USB keyboard for
ACPI mode.
ACPI
q
ACPI specification 1.0b.
q
S0, S1, S3 and S5 sleep state support.
q
On board device power management support.
q
On board device configuration support.