Acer Aspire easyStore H340 User Manual Download Page 131

Page: 131 / 148

117

6 Troubleshooting

This chapter describes a list of possible situations that may arise during
the use of your home server.

If you are unable to resolve problems on your own, contact your dealer
or local Acer representative for assistance.

First steps checklist

•

AC power available at the wall outlet?

•

Are the power supplies plugged in? Check the AC cable(s) on the
back of the chassis and at the AC source.

•

Are all cables correctly connected and secured?

•

Are all peripheral devices installed correctly?

•

Are all device drivers properly installed?

•

Did you press the system power button on the front panel to turn
the system on (power indicator should be lit)?

•

Is the system power cord properly connected to the system and
plugged into an outlet for 100-127 V or 200-240 V?

Summary of Contents for Aspire easyStore H340





















































































































































Search results

Summary of Contents for Aspire easyStore H340

Reviews:

Related manuals for Aspire easyStore H340

Brands by name

Popular brands

Acer Aspire easyStore H340, User Manual

Search results

Summary of Contents for Aspire easyStore H340

Reviews:

Related manuals for Aspire easyStore H340

Brands by name

Popular brands