manualshive.com logo in svg

Acer Aspire 8930 Series, Service Manual, Page: 31 / 118

Share
Download
Acer Aspire 8930 Series Service Manual Download Page 31

Chapter 1

25

Windows Mobility Center

The Windows Mobility Center collects key mobile-related system settings in one easy-to-find place, so you can 
quickly configure your Acer system to fit the situation as you change locations, networks or activities. Settings 
include display brightness, power plan, volume, wireless networking on/off, external display settings, display 
orientation and synchronization status.
Windows Mobility Center also includes Acer-specific settings like Bluetooth Add Device (if applicable), sharing 
folders overview/sharing service on or off, and a shortcut to the Acer user guide, drivers and utilities. To launch 
Windows Mobility Center:
                        •

 

Use the shortcut key < > + <X>.

                        •

 

Start Windows Mobility Center from the Control panel.

                        •

 

Start Windows Mobility Center from the Accessories program group in the Start menu.

Summary of Contents for Aspire 8930 Series























































































































Reviews:

No comments