Acer Aspire 3010 Series, Service Manual

Page: 41 / 123

37 Chapter 2
Advanced
The Advanced menu screen contains parameters involving your hardware devices. It also provides advanced
settings of the system.
The table below describes the parameters in the screen. Settings in boldface are the default and suggested
parameter settings.
.
Parameter Description Options
Infrared Port Enables, disables or auto detects the infrared port. Enabled
/Disabled/Auto
Base I/O address Sets the I/O address of the infrared port. 2F8
/3F8/3E8/2E8
Interrupt Sets the interrupt request of the parallel port.
IRQ3
/IRQ4
DMA channel Sets a DMA channel for the infrared port. DMA
/DMA3
Parallel Port Enables, disables or auto detects the parallel port.
Enabled
/Disabled/Auto
Mode Sets the operation mode of the parallel port. ECP
, EPP, Output only or Bi-
directional
Base I/O address Sets the I/O address of the parallel port.
378
/278
Interrupt Sets the interrupt request of the parallel port. IRQ7
/IRQ5
PhoenixBIOS Setup Utility
Info. Main Advanced Security Boot Exit
Item Specific Help
Infrared Port (FIR)
Base I/O address:
Interrupt:
DMA channel:
Configure Infrared Port
using options:
[Disable]
No configuration
[Enabled]
User configuration
[Auto]
BIOS or OS chooses
configuration
(OS Controlled)
Displayed when controlled
by OS
F1 Help
↑ ↓
Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit
← →
Select Menu Enter Select
4
Sub - Menu F10 Save and Exit
Parallel port:
Mode:
Base I/O address:
Interrupt:
DMA channel:
[Enabled]
[2F8]
[IRQ 3]
[DMA 1]
[Auto]
[ECP]
[378]
[IRQ 7]
[DMA 3]
Infrared Port (FIR): [Enabled]