manualshive.com logo in svg

Acer AN515-51, Service Manual

The Acer AN515-51 is a high-performance gaming laptop designed to deliver an immersive gaming experience. Enhance your gaming skills with this powerful device featuring cutting-edge technology and exceptional graphics. Unlock the full potential of your laptop by accessing its comprehensive Service Manual for free download at manualshive.com.

Share
Download
background image

Service and Maintenance

5-53

SSD Module Installation

1.

Connect the SDD module to the mainboard connector.

Figure 5-75.   Connecting the SSD Module Connector

2.

Attach the screw to secure the SSD module to the mainboard.

 

NOTE:

 Screw torque force = 1.5~2.0kgf.cm

Figure 5-76.   Securing the Screw

3.

Install the lower case (see 

Lower Case Installation

 on page 

5-30

).

Summary of Contents for AN515-51







































































































































































































































































































Reviews:

No comments

Related manuals for AN515-51

Acer AcerNote Light 370P Safety Instructions preview
AcerNote Light 370P
Brand: Acer Pages: 16
Gateway LT 1000 Reference Manual preview
LT 1000
Brand: Gateway Pages: 102
IBM THINKPAD THINKPAD A30 Service And Troubleshooting Manual preview
THINKPAD THINKPAD A30
Brand: IBM Pages: 88
Fujitsu Siemens Computers AMILO Xi Series Easy Manual preview
AMILO Xi Series
Brand: Fujitsu Siemens Computers Pages: 96
Monster ABRA A7 V11.3 User Manual preview
ABRA A7 V11.3
Brand: Monster Pages: 74
Acer TravelMate B3 11 User Manual preview
TravelMate B3 11
Brand: Acer Pages: 85
Acer Aspire V7-582 Service Manual preview
Aspire V7-582
Brand: Acer Pages: 376
Acer Aspire VX 15 User Manual preview
Aspire VX 15
Brand: Acer Pages: 75
Acer Chromebook CB315-3H User Manual preview
Chromebook CB315-3H
Brand: Acer Pages: 33
Acer Chromebook CB5-132T Lifecycle Extension Manual preview
Chromebook CB5-132T
Brand: Acer Pages: 36
Acer CP713-2W User Manual preview
CP713-2W
Brand: Acer Pages: 32
Acer Extensa 14 User Manual preview
Extensa 14
Brand: Acer Pages: 75
Acer Extensa 5220 Service Manual preview
Extensa 5220
Brand: Acer Pages: 182
Acer Extensa 5210 Service Manual preview
Extensa 5210
Brand: Acer Pages: 182
Acer Extensa 4630G Service Manual preview
Extensa 4630G
Brand: Acer Pages: 194
Acer Extensa 390 Features Manual preview
Extensa 390
Brand: Acer Pages: 30
Acer Packard Bell 314 User Manual preview
Packard Bell 314
Brand: Acer Pages: 33
Acer Predator 17 X GX-792 User Manual preview
Predator 17 X GX-792
Brand: Acer Pages: 94

Brands by name

Popular brands

Load more brands