Acer Altos S205F User Manual Download Page 25

Page: 25 / 58

Introduction

1.3.6 Dummy Carrier Modules

Dummy carrier modules are provided for fitting in all unused drive bays. They are designed as
integral drive module front caps with handles and must be fitted to all unused drive bays to
maintain a balanced airflow.

1.3.7 Blank Modules

Warning

Operation of the Enclosure with

ANY

modules missing will disrupt the airflow and the drives will

not receive sufficient cooling. It is

ESSENTIAL

that all apertures are filled before operating the unit.

Dummy Carriers and/or Blank modules are available for this purpose.

1.4 Visible and Audible Alarms

The functional modules have associated status LEDs. The Ops Panel shows a consolidated status for
all modules.

LEDs show constant green for good or positive indication. Constant Amber LEDs indicate there is a
fault present within that module.

The Ops Panel also incorporates an Audible Alarm to indicate when a fault state is present and also
an Alarm Mute push-button.

Warning

The Ops Panel is an integral part of the enclosure chassis assembly and can only be replaced by
trained personnel.

Figure 1–13

Anti-tamper Lock

Summary of Contents for Altos S205F



























































Search results

Summary of Contents for Altos S205F

Reviews:

Related manuals for Altos S205F

Brands by name

Popular brands

Acer Altos S205F, User Manual

Search results

Summary of Contents for Altos S205F

Reviews:

Related manuals for Altos S205F

Brands by name

Popular brands