Altos R720 Installation Configuration Guide
60
Software Required
The management utility of integrated SAS hardware RAID 2 can be found in
the EasyBUILD 7.1 build 100 (or later).
Software Version
EasyBUILD
Version
RAID Web Console
2
2.63
EasyBUILD 8.0 build 200 (or later)
Configuring integrated SAS hardware RAID 2
Please refer to the APPENDIX B. for the integrated SAS hardware RAID 2
configuration.
Installation Tips
NOTE. There is no built-in driver Integrated SAS hardware RAID 2 in the Red
Hat Enterprise Linux 4.0 Update2. If you do not have the optional internal USB
floppy drive, you need an external USB floppy drive for applying driver during
the OS installation.
1.
Since Red Hat Enterprise Linux 4.0 Update2 cannot recognize the
integrated SAS hardware RAID 2, you need to make a driver diskette from
the EasyBUILD 7.1 build 100 first before the installation.
2.
Type linux dd when the prompt boot: appears at the start.
3.
Please select the sda as the Driver Disk Source.
4.
Follow the instruction to load the integrated SAS hardware RAID 2 driver
from the driver diskette.
5.
At the Package Installation Defaults, select Customize software packages
to be installed.
6.
At the Package Group Selection step, select Development Tools under
Development.
7.
Follow the normal procedure to finish the installation.
Gigabit Ethernet Driver Installation
1.
You can find the Intel 82546EB driver in EasyBUILD 7.1 build 100. Please
refer to directory of the 82546EB driver in Driver Required section and
copy the driver from the EasyBUILD 7.1 build 100 to HDD first.
# mount /media/cdrecorder
# cp –R /media/cdrecorder/Disk/R720/NIC/Intel/pro1000.lx/. /tmp
2.
Change the directory to the driver source and install the driver
# cd /tmp/src/
# make install
# insmod e1000.ko