![background image](http://html.mh-extra.com/html/acer/altos-r520-m2/altos-r520-m2_user-manual_5832155.webp)
137
LSI MegaRAID SAS RAID Configuration Utility
This section explains how to create a RAID volume when the LSI
MegaRAID SAS 8708EM2 RAID controller board is installed.
To initialize the LSI MegaRAID SAS RAID Configuration Utility:
1
Turn on the server and the display monitor.
If the server is already turned on, close all open applications, then
restart the server.
2
During POST, press
Ctrl
-
H
on the RAID BIOS prompt.
After POST completion, the Adapter Selection window will appear.
3
Click
Start
to launch the Configuration menu.
To load the factory default RAID setting:
1
On the Configuration menu, select
Controller Properties
to
display the adapter settings.
2
Click
Next
to change the adapter setting.
3
Change the setting of Set Factory Defaults from No to
Yes
, then
click
Submit
.
4
Press
Ctrl
+
Alt
+
Del
to reboot the server.
To create and initialize a RAID volume:
1
Access the Configuration menu.
2
On the Configuration menu, select
Configuration Wizard
.
3
Select
Add Configuration
, then click
Next
.
4
Select
Custom Configuration
, then click
Next
.
5
Use the
Ctrl
key to select the drives that you want to add into the
array.
6
After selecting the drives, click
AddtoArray
.
7
Click
Accept DG
, then
Next
.
8
Select the Drive Group you just created, then click
Add to SPAN
,
then
Next
.
9
Select the
RAID Level
you want to use.
10 Create the logical volume and specify its size on the Select Size
field, then click
Accept
.
Summary of Contents for Altos R520 M2
