12
Chapter 1
Hardware Specifications and Configurations
Processor
Item
Specification
Type
Single or dual Intel
®
Xeon
TM
processor with 800 MHz FSB
Intel
®
Hyper-Threading
TM
Technology support
Slot
Socket 604
Speed
800MHz/2.8GHz/3.0GHz/3.2GHz/3.4GHz/3.6GHZ
base bus frequency
200 MHz
Voltage
The base board has two VRDs (Voltage REgulator Devices)
providing the appropriate voltages to the installed processors. Each
VRD is compliant with the VRD 10.1 specification and is designed to
support Intel
®
Xeon
TM
processors that require up to a sustained
maximum of 105AMPs (amperes) and peak support of 120A.
Note: The server board is designed to provide up to 120A per
processors. Processors with higher current requirements are not
supported.
Memory Configuration
Item
Description
DDR and DDR 333 registered
ECC DIMM modules
DIMM organization
x72 ECC
Pin count
184
DIMM capacity
The server board provides the following maximum memory
capacities based on the number of DIMM slots provided and
maximum supported memory load by the chipste:
24GB maximum capacity for DDR-266
16GB for DDR-333 and DDR2-400
Minimum memory supported
with teh system running in
single channel memory mode
256MB for DDR-266 and DDR-333
DIMM supported capacities
Serial PD
JEDEC Rev 2.0
Voltage options
2.5V (VDD/VDDQ)
Interface SSTL2
Two DIMMs must be populated in a bank for a X144 wide memory data path.
Any or all memory banks may be populated
SDRAM Parts / SDRAM Technology Used
512MB
1GB
X8, single row
512MB
1GB
X8, double row
1GB
2GB
X4, single row
1GB
2GB
X4, Stacked, double row
2GB
4GB
Summary of Contents for Altos R510
