63
Altos G520
Removing the LED Board
1.
Disconnect LED cable 12 PIN from LED case board
2.
Disconnect the 16-34PIN LED cable from the LED case board.
3.
Remove the one screw.
4.
Remove the two screws located as shown here.
5.
Detach the LED board from the chassis.
6.
Pull the front fan out from the chassis.
7.
Remove the two screws to release the intrusion cable.
8.
Remove the two screws to release the intrusion cable.
9.
Remove the one screw to remove the LED holder.
10.
Take the LED module out from the position.
11.
Remove the two screws.
12.
Then remove the USB cable.
Summary of Contents for Altos G520 series
Page 6: ...VI ...
Page 64: ...56 Chapter 2 ...
