Chapter 2
49
To set an Administrator/User password
1.
Use the up/down keys to highlight a password parameter (Administrator Password or User Password)
then press
Enter
.
A password box will appear.
2.
Type a password then press
Enter
.
The password may consist of up to six alphanumeric characters (A-Z, a-z, 0-9).
3.
Retype the password to verify the first entry then press
Enter
again.
After setting the password, the system automatically sets the chosen password parameter to installed.
To remove the User Password
1.
Use the up/down keys to highlight the Clear User Password parameter then press Enter.
2.
Enter the current Admin password then press
Enter
.
3.
Press Enter twice without entering anything in the new and confirm password fields.
After doing this, the system automatically sets the User Password parameter to
Not
installed.
Summary of Contents for Altos G520 series
Page 6: ...VI ...
Page 64: ...56 Chapter 2 ...