Acer Altos 9100B, User Manual

Page: 37 / 180

Chapter 1 – System Board 1-19
Table 1-4 System Error Messages
Message Action
CMOS Battery Error Replace the RTC chip or
contact your dealer.
CMOS Checksum Error Check the RTC chip and the
necessary jumper. If the
battery is still good, run
Setup.
Display Card Mismatch Run Setup (see section 3.1).
Diskette Drive Controller
Error or Not Installed Check and connect the
control cable to the diskette
controller.
Diskette Drive Error Diskette may be defective. If
not, replace the diskette drive.
Diskette Drive A Type
Mismatch Run Setup (see section 3.1)
and select the proper drive
type.
Diskette Drive B Type
Mismatch Run Setup (see section 3.1)
and select the proper drive
type.
Equipment Configuration
Error Modify the memory
configuration to agree with
one of the options in Table 2-
3 or 2-4.
Hard disk Controller Error Run Setup (see section 3.1).
Hard disk 0 Error Check all cable connections.
Replace hard disk.
Hard disk 1 Error Check all cable connections.
Replace hard disk.
Keyboard Error or No
Keyboard Connected Check and connect the
keyboard to the system unit.
Keyboard Interface Error Replace the keyboard or
contact your dealer.