Acer AL708, User Manual

Page: 7 / 36

5. ELECTRICAL SPECIFICATIONS
5.4 Preset Timings
5.1 Standard conditions
5.2 POWER
5.2.1 Power supply
5.2.2 Power Management
5.5 Signal level and input impedance
5.5.1 Video Signal level
This LCD display is adjusted at the factory
5.3 Acceptable timing
using 0,7 Vp-p Video signal.
If your timing is within following specification, 5.5.2 Sync Signal level
this LCD display can automatically function with
H/V Separate : TTL level
a certain position.
5.5.3 Input impedance
Horizontal: Sync frequency : 30~81 kHz Video input : 75 ohms
Vertical : Sync frequency : 56~75Hz Sync input : > 1 k ohms
State Power Indicator
On < 50Watts Green
Standby < 5 Watts Amber
Off < 5 Watts
Input voltage 90~240 Volts
Power frequency 50 / 60 Hz, +/-3
Input current < 0.5 A
Inrush current < 1 A
Power < 50 Watts
Display area 338 x 270 mm
Video signal level 0.7 Vpp
Contrast Max.
Brightness Max.
Ambient 20 +/- 5 C degrees
Input voltage AC 120,60Hz
Warming up time > 30 minutes
Display mode 1280 x 1024
Fv Fh
# mode Resolution Hz (KHz)
1 IBM VGA 720 x 400 70 31.46
2 VESA 640 x 480 60 31.46
3 MAC 13” 640 x 480 67 35
4 VESA 640 x 480 72 37.86
5 VESA 640 x 480 75 37 5
6 VESA 800 x 600 56 35.16
7 VESA 800 x 600 60 37.87
8 VESA 800 x 600 72 48.07
9 VESA 800 x 600 75 46.87
1
MAC 16” 832 x 624 75 49.72
1
VESA 1024 x 768 60 48.36
1
VESA 1024 x 768 70 56.48
1
VESA 1024 x 768 75 60.02
1
VESA 1152 x 864 75 67.5
1
VESA 1280 x 1024 60 63.98
1
VESA 1280 x 1024 75 79.97
L7EA (AL708) 3-2