26
Chapter 2
Setting a Password
1.
Make sure that JP7 is set to 1-2
(bypass password).
NOTE: You cannot enter the BIOS utility if a Setup password does not exist and JP7 is set to 2-3 (password
check enabled). By default, JP7 is set to 1-2 (bypass password).
2.
Enter the BIOS utility and select
System Security
.
3.
Highlight the
Setup Password
parameter to set a Setup password, or
Power-on Password
to set a Power-on
password. Then press
←
←
←
←
or
→
→
→
→
. The following screen appears:
4.
Type a password. The password may consist of up to seven characters. Then press Enter.
NOTE: Be very careful when typing your password because the characters do not appear on the screen.
5.
Retype the password then press Enter.
6.
After setting the password, highlight the
Set or Change Password
option.
7.
Press Esc to return to the System Security screen.
8.
Press Esc to return to the main menu.
9.
Press Esc to exit the BIOS utility. A dialog box appears asking if you want to save the CMOS data.
10. Select
Yes
to save the changes and reboot the system.
11. After rebooting, turn off the system then open the housing.
12. Set JP7 to 2-3 to enable the password function.
If you have set a Setup password, the next time you want to enter the BIOS utility, you must key-in your Setup
password.
If you have set a Power-on password, you will be prompted to enter that password every time you boot your
system.
Changing or Removing the Password
Should you want to change one of your passwords, do the following:
1.
Enter the BIOS utility and select
System Security.
2.
Highlight the
Setup Password
parameter (for Setup password) or the
Power-on Password
parameter (for
Power-on password). Then press
←
←
←
←
or
→
→
→
→
. The Password menu appears.
3.
From the Password menu, highlight the
Set or Change Password
option.
4.
Enter a new password.
5.
Press Esc to return to the System Security screen.
6.
Press Esc to return to the main menu.
7.
Press Esc to exit the BIOS utility. A dialog box appears asking if you want to save the CMOS data.
8.
Select
Yes
to save the changes.
Summary of Contents for AcerPower SN
