Acer AcerPower Flex4000 Series User Manual Download Page 71

Page: 71 / 141

Index

2.6.3

Load Default Settings

This option loads the default settings for the optimized system configuration. Press
to return to the Main menu.

If your system does not have a floppy drive, loading the default settings will enable a
floppy drive when it should not. To correct this condition, refer back to section 2.2 and
set “Floppy Drive A” to “None” in the BIOS.

2.6.4

Save CMOS Settings

Select this option to save the current BIOS settings, including your recent modifications.
Press

to return to the Main Menu.

2.6.5

Abort Settings Change

This option cancels all modifications that you have made in the system configuration and
reloads your previous settings. Press

to return to the Main Menu.

Summary of Contents for AcerPower Flex4000 Series














































































































































Search results

Summary of Contents for AcerPower Flex4000 Series

Reviews:

Related manuals for AcerPower Flex4000 Series

Brands by name

Popular brands

Acer AcerPower Flex4000 Series, User Manual

Search results

Summary of Contents for AcerPower Flex4000 Series

Reviews:

Related manuals for AcerPower Flex4000 Series

Brands by name

Popular brands