Acer AcerPower Flex4000 Series, User Manual

Page: 42 / 141

AcerPower Flex4000 Series (V59LA/IDB3-C) User’s Guide
42
Here are some corrective measures for error conditions:
1. Run Setup (see section 2.1). You must know the correct configuration values for your
system before you enter Setup, which is why you should write these values down
when the system is correctly configured. An incorrect Setup configuration is a major
cause of power-on error messages, especially for a new system. Generally, choosing
the “Load Setup Default Values” option will correct most error messages.
2. Remove the system cover according to the directions in Chapter 3, System Housing.
Verify that the system board and any expansion boards are configured correctly.
3. Verify that all connectors and boards are secure. Consult the system housing chapter
for assistance.
4. If you cannot access a new fixed disk, it may be because your disk is not physically
formatted.
If you follow the corrective steps above and still receive an error message, the cause may
be an equipment malfunction.
If you are sure that your configuration values are correct and your battery is in good
condition, the problem may lie in a damaged or defective chip. Contact an authorized
service center for assistance.