![background image](http://html.mh-extra.com/html/acer/acerpower-8600/acerpower-8600_user-manual_5736096.webp)
Chapter 4
Upgrading the System
84
Do not attempt the procedures described in the following sections unless
you are a qualified service technician.
Post-installation Instructions
Observe the following after installing a system component:
1.
See to it that the components are installed according to the step-
by-step instructions in their respective sections.
2.
Make sure you have set all the required jumpers. See “Jumpers
and Connectors” on page 31 for the correct jumper settings.
3.
Replace any expansion boards or peripherals that you removed
earlier.
4.
Replace the system cover.
5.
Connect the necessary cables and turn on the system.
Summary of Contents for AcerPower 8600
