Setup Utility
48
User’s Guide
Power Saving Configuration
The Power Saving Configuration parameters are
configurable only if your computer supports the power
management feature.
The following screen shows the Power Saving Configuration
parameters and their default settings:
Power Saving Configuration
Page 1/1
Power Management Mode ..................................... [Enabled ]
Power Saving Operation Mode .......................... [QuickStart]
IDE Hard Disk Standby Timer ...................... [ 15] Minute(s)
Monitor Power Saving Timer ........................ [ 15] Minute(s)
System Standby Timer ................................ [Off] Minute(s)
System Suspend Timer ............................... [Off] Minute(s)
Monitored Activities
IRQ 2/IRQ 9 ............ [Disabled]
IRQ 8................... [Disabled]
IRQ 3 ...................... [Disabled]
IRQ 10................. [Disabled]
IRQ 4 ...................... [Disabled]
IRQ 11................. [Disabled]
IRQ 5 ...................... [Disabled]
IRQ 12................. [Enabled ]
IRQ 7 ...................... [Disabled]
IRQ 15................. [Enabled ]
QuickStart State Timer........................................ [ 2] Second(s)
Point Device Location ......................................... [PS/2]
↑↓
= Move Highlight Bar,
→
←
= Change Setting
PgDn/PgUp = Move Screen, F1 = Help, Esc = Exit
Power Management Mode
This parameter allows you to reduce power consumption.
When this parameter is set to
Enabled
, you can configure the
IDE hard disk and system timers. Setting to
Disabled
deactivates the power management feature and all the
timers.
Summary of Contents for AcerBasic II
Page 1: ...AcerBasic User s Guide ...
