Acer AcerBasic II User Manual Download Page 3 | Manualshive

Page: 3 / 72

background image

iii

IMPORTANT SAFETY
INSTRUCTIONS

1.

Read these instructions carefully. Save these instructions for future
reference.

2.

Follow all warnings and instructions marked on the product.

3.

Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

4.

Do not use this product near water.

5.

Do not place this product on an unstable cart, stand, or table. The
product may fall, causing serious damage to the product.

6.

Slots and openings in the cabinet and the back or bottom are
provided for ventilation; to ensure reliable operation of the product
and to protect it from overheating, these openings must not be
blocked or covered. The openings should never be blocked by placing
the product on a bed, sofa, rug, or other similar surface. This
product should never be placed near or over a radiator or heat
register, or in a built-in installation unless proper ventilation is
provided.

7.

This product should be operated from the type of power indicated on
the marking label. If you are not sure of the type of power available,
consult your dealer or local power company.

8.

Do not allow anything to rest on the power cord. Do not locate this
product where persons will walk on the cord.

9.

If an extension cord is used with this product, make sure that the
total ampere rating of the equipment plugged into the extension
cord does not exceed the extension cord ampere rating. Also, make
sure that the total rating of all products plugged into the wall outlet
does not exceed the fuse rating.

«
1
2
3
4
5
...
»

Summary of Contents for AcerBasic II









































































Reviews:

No comments

Related manuals for AcerBasic II

Brand: Daikin Pages: 20

FPMA-MOBILE1800

Brand: New Star Computer Products Pages: 4

ARK-3531 Series

Brand: Advantech Pages: 84

DESKMINI SERIES

Brand: ASROCK Pages: 70

Brand: MSI Pages: 123

Brand: Gigabyte Pages: 2

EloPOS 15'' Series

Brand: Elo Touch Solutions Pages: 39

Brand: Moxa Technologies Pages: 42

Brand: Zotac Pages: 57

Altos BrainSphere P130 F7

Brand: Acer Pages: 40

Brand: Acer Pages: 48

Brand: Acer Pages: 68

5535-5050 - Aspire

Brand: Acer Pages: 11

Brand: Acer Pages: 24

Brand: Acer Pages: 24

Brand: Acer Pages: 22

Brand: Acer Pages: 117

Brand: Acer Pages: 108

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands