System
To select the input video system standard. When an AV
box or turner box is attached, the projector will
automatically detect the video system. Users also can
select desired video systems. When selecting system,
the projector will detect the selected system
simultaneously, and the OSD will still exit on the
screen. The default setting of System is “Auto” (See
Figure 25).
Color
(Less)
(More)
Tint
(Red)
(Green)
Source is Video
or S-Video
*
Tint may not be adjusted with PAL/SECAM video signal input
.
C
Control Page
When users go into the Control sub-
page, the first item “Auto” will be
highlighted. There are five items on
this page: Reset, Language, Mirror,
Auto Off and Reset (Fig. 26).
Figure 26 Control sub-page
Setting effects
Auto
To reset display, image and control settings to factory
settings.
Language
To select the OSD menu language. Seven languages are
supported: English, French, German, Italian, Spanish,
Simple Chinese and Chinese. (See Figure 26).
Mirror
To select Normal projection, H-Invert projection, V-
Invert projection, or H/V Invert projection.
Auto Off
To set the time to turn the power off after the start up
screen is displayed and no signal is detected or sync is
out of range. To select, use “
3
” (KEYSTONE-) or “
4
”
(K) to set the time. 0 means Auto Off function
inactive.
*Default setting is 0 (stop).
Lamp
The usage time of lamp will display on this item. And
you can reset the usage time of lamp from this item
after you change a new lamp. ( See page 18 )
English 23
