Main Unit
Function
Standby/On
To turn the projection lamp on and off.
Freeze
Pressing this button displays a still (frozen)
picture.
Magnify
Pressing this button partially magnifies a displayed
picture.
(Move the picture with the Disk Pad after pressing
the Magnify button.)
Disk Pad
When the OSD menu is active, Disk Pad acts as
56
selecting device. When the on-screen menus are
not active, it works as mouse pad. When the magnify
function is active, use disk pad to move through the
picture.
Menu
Call the OSD Menu.
To enter sub pages.
To select items.
Blank
The blank screen is displayed by pressing Blank. And
the blank screen will be revealed partially from top
to bottom by pressing Blank again.
Source
Selects the input source.
Mute
Mutes the sound.
Volume
Adjusts volume. The sound gets louder or quieter by
pressing the "+" or "-" button.
Laser
Laser pointer on button. Use as a stick (for
indication).
Mouse Left-
Click
When operating in mouse emulation mode, it registers
a left mouse click. (bottom button)
Mouse Right-
Click
When operating in mouse emulation mode, it registers
a right mouse click.
Exit
To leave current OSD Pages.
34
Drag
To move Left/Right among OSD items.
The remote control allows you to operate the function keys on the projector and to
emulate mouse function when the projector is connected to a computer.
Inserting Batteries in the Remote Control
Be sure to follow instructions in placing batteries into the remote
control units.
Push and slide the lid in the direction of the arrow.
•
•
•
Install two ’AAA’ batteries as indicated inside the battery
compartment.
Replace the lid and snap into place.
English 13
