Resetting Lamp Timer
If replacing the lamp after 1500 hours of operation, please carry
out the following operation within 10 minutes of powering on.
OSD FUNCTION
Press the MENU button into OSD
menu, and use “
4
” (K)
or “
3
” (KEYSTONE-) to select
the Control page. Then press
the Menu button again to
highlight the Lamp item.
Press “
4
” (K) or “
3
”
(KEYSTONE-) buttons, the lamp
usage time will display on the
bottom of the screen and can be
adjusted.
•
•
Use the “
4
” (K) or
“
3
” (KEYSTONE-) buttons to
select the "Reset" item and
press the “MENU” to reset the
usage time.
After reset the usage time,
press “EXIT” (AUTO) to save
and exit.
OSD
Main OSD Menu
Press the “Menu” key and the main OSD
menu structure will display as shown at
right hand (Fig. 21). Whenever AV box
is attached, 4 sub-pages will display
in the menu: Display page, Image page,
Control page, and Source page. However
if input is from PC and no AV box is
attached, Source page will not display
in the menu.
Press the “Menu” key again to enter
Display page items, or press “
3
” (KEYSTONE-)or “
4
” (K) to
select sub-pages. (The main OSD menu
will automatically disappear if a key is
not pressed within 10 seconds).
Figure 21 Main OSD menu
English 20
