Acer 6930 6082 - Aspire - Core 2 Duo GHz, Service Manual, Page: 156 / 238

146 Chapter 4
0xB7 Initialize ACPI BIOS. LBT Core
0x9B Enable CPU management (Geyserville I) LBT Core
0xBD Display Boot First menu if MultiBoot is installed and hotkey
pressed. LBT Core
0xBF Check virus and backup reminders. LBT Core
0x97 Create pointer to MP table in Extended BDA. LBT Core
0x99 Check support status for Self-Monitoring Analysis Reporting
Technology (disk-failure warning). LBT Core
0xB1 Unload ROM Pilot LBT Core
0xDD Perform remote flash if requested LBT Core
0xC7 If UCR redirection is installed, remove display manager and
unhook INT10 LBT Core
0XDF Shutdown the PXE UNDI code LBT Core
0xB3 Store enhanced CMOS values in non-volatile area LBT Core
0xE4 Last Legacy BIOS Task before hand off to UEFI/DXE LBT Core
0xB9 Clear all screen graphics before booting. bootLegacy Core
0xC0 INT19 entry for legacy boot bootLegacy Core
0xEF Invalid AP # SDXE Core
0xEF Non-Yohna and non-Modem class CPU found for SDXE
(getTSCFreq) SDXE Core
0xEE AP cannot synch BSP in SDXE (syncWithBSP) SDXE Core
0xEE BSP cannot synch w/ AP in SDXE (syncWithAP) SDXE Core
POST
Code
Function Phase Component