Power on the unit ( using two connections simultaneously ), short press MFB to
connect all the connected device automatically, but it only support two devices
connection simultaneously, prioritize the latest two connected devices, successfully
connected, BTI-029 is solid blue. If BTI-029 could not connect with any device in 22
seconds (This is up to how many paired device BTI-029 stored), it will enter into
pairing mode. When used as Bluetooth transmitter, it support two connected devices
transfer Audio simultaneously.
6.
Power off automatically
The SK-BTI-029 will power off automatically when the battery voltages lower than 3.1V.
7. Pairing status:
Blue Led light flash quickly used as Bluetooth transmitter status.
8. No connection standby status:
Blue Led light flash once every second in no connection standby status
9. Connected standby status:
Blue Led long light in connected standby status
10. Low battery status :
Low battery status (RX):red LED flashes once every one second
，
and it will cover other Led
light (Charging immediately or power off will remove this status).
11.
Interface switching:
In off state or working state, switch between AUX and SPDIF through the toggle switch(If
choose SPDIF mode,the optical interface using SPDIF IN in TX mode)
12.
SK-BTI-029 working while charging
When need to use the SK-BTI-029 for long time, due to the limited built-in battery usage time,
it allowed to connect the charging power supply (DC 5V ≥300mA, when the battery is low or
when the power supply of poor quality may cause the current sound appears); operation
steps: connect the charging power and then power on SK-BTI-029,(because the chipset will
reset operation when insert charging power supply, can resume normal use when SK-BTI-
029 software crashes).,Note: it is not recommend to use this function while charging ,
otherwise it may affect battery life.
SK-BTI-029 working as receiver function and LED instruction
SK-BTI-029 is through toggle switch to select the mode is transmitter or receiver mode
after powered on. In power off status, switch to “RX” end, and long press "multi-function
key" to power on, all paired device information will be cleared in TX mode after powered
on!!!Please don’t switch TX/RX mode within 3 seconds after powered off, because the
chipset has not been fully powered down, other wise it will enter into the previous power
off mode to re-turn on
SK-BTI-029 worked as Bluetooth Receiver can store 8 paired devices record , the latest
paired records will be replaced by new paired records.(but the re-connection time will
increase for more Stored paired device,SK-BTI-029 automatically re-connection time : 7
seconds for the unit has 1 paired record, 12 seconds for the unit has 2 paired records ,17
seconds for the unit has 3 paired records , 22 seconds for the unit has 4 paired records)
1. Power on:
