3
/
17
Table of contents
Step 1 : Open the frame and lock it in the clip (B) .......................................... 6
Step 2 : Protect the frame of the wheelchair with the tape supplied .................. 6
: Measure the distance from the ground to the axis of the frame’s tube
Unscrew the indexing digit (L) ............................................................... 8
Unscrewing the 2 screws (2) and setting up the right loop on the right side
Put back the indexing digit .................................................................... 9
Step 5 : In the same way, set up the left loop .............................................. 11
Step 6 : Close the frame and measure the distance L .................................... 11
: Check the height between the frame’s axis and the ground
Step 8 : Check the space for the insertion of the Yomper ............................... 13
Step 9 : Check the adjustment of the stop (H) .............................................. 14
Summary of Contents for Yomper
Page 2: ...2 17...
Page 10: ...10 17...
Page 15: ...15 17 The frame can now be used...
Page 17: ...17 17 contact acekare com...