14
/
17
2.9
Step 9
: Check the adjustment of the stop (H)
The stop (H) prevents the Yomper from making the wheelchair topple backwards.
It needs to be perfectly adjusted for the safety of the user.
The Yomper’s and frame’s stops must touch when the front wheels of the wheelchair are
lifted 120mm above the ground.
If it’s not the case, adjust the position of the stop (H) on the locknut (G’) (rough
adjustment) then adjust the position of the Yomper’s stop (final adjustment).
Summary of Contents for Yomper
Page 2: ...2 17...
Page 10: ...10 17...
Page 15: ...15 17 The frame can now be used...
Page 17: ...17 17 contact acekare com...