Installing the Batteries into the Digital Pad
Open the battery compartment cover of
the digital pad. Insert four batteries (1.5
volt, size AAA) into the battery
compartment in accordance with the
indication in the battery compartment.
Close the battery compartment cover.
Note! Incorrect battery installation may
damage the digital pad.
Note! Do not mix new and used batteries.
Note! With continuous use of the digital pad, four AAA alkaline batteries will
last approximately 80 hours.
Installing the Battery into the Digital Inking Pen
Pen Cap
Ink Cartridge
Pen Clip
Front Section
Barrel
Barrel Cover
Rear Section
(-) Cap
(+) Can
Battery
Compartment
Unscrew the barrel cover counterclockwise from the
barrel of the pen. Take out the button cell battery
(SR626SW, 377 or IEC-SR66) that is included in the
package of the DigiMemo. Insert the battery into the
battery compartment with the negative (-) cap facing the
battery compartment. Screw the barrel cover clockwise
onto the barrel until tight.
Note! Incorrect battery installation will result in the malfunction of the digital
inking pen.
Note! The battery of the digital inking pen will last approximately 14 months.
Note! The front or rear section of the pen can hold the pen cap.
Note! You can attach some cord or accessory to the pen
through the two holes on the pen end.
Pen End
3
