![Acecad DigiMemo L2 User Manual Download Page 37](http://html1.mh-extra.com/html/acecad/digimemo-l2/digimemo-l2_user-manual_3915878037.webp)
Appendixes
Replacing the Cartridge of the Digital Pen
Open the cartridge compartment cover on the back of the digital pad. Two
replacement ink cartridges and one plastic pen tip are stored in the cartridge
compartment of the digital pad.
Clip Hole
To replace the cartri
e
old one out. Then in
ge tip firmly against a
hard surface until it snap
1. Hol
into
2. Ge
side
each.
4. Ins
aga
Purch
ement Ink Cartridges
The specification of ink cartridge used for the digi
(Diameter) x 67 mm/2.64" (Length).
Note! The material of some ink cartridges may affect the perfo
digital pen. Some ink cartridge with the different outside dimensions
may damage the digital pen.
Note! The following ink cartridges have been tested and approved for use with
dge of the pen, you may use a small clip to gently pull th
sert a new one and press the cartrid
s into place.
You can also use the clip hole in the cartridge
compartment to replace the cartridge.
d the digital pen upright and insert the cartridge tip
the wider side of the clip hole.
ntly push the pen horizontally towards the narrow
of the clip hole to as far as it can r
1
2
3
3. Gently pull out the cartridge from the pen.
ert a new one. Then press the cartridge tip firmly
inst a hard surface until it snaps into place.
asing New Replac
tal pen is 2.3 mm/0.09"
rmance of the
31