the root directory.
If the erro
indicates th
contact the
General Problems
ge is created.
The Damage of the Digital Pad — the Error Code E03 or E05
r code
E03
or
E05
appears on the display of the digital pad, it
at the digital pad may be damaged. It needs to be repaired. Please
ACECAD distributor.
Troubleshooting
Problem:
A superimposed digital pa
Solution:
Make sure to select a blank digital page each time you change a
page on paper.
Problem:
Minor lengthened or shortened digital ink strokes occur
Solution:
Write a little bit slowly or harder.
Problem:
Significant missing, twisted, lengthened or shortened digital ink
strokes occur.
Solution:
Please check the following situations for the digital pen:
the pen.
to the battery compartment with
fact, such
cushion will remain at its original
se press the
e until it snaps into
z
The battery is correctly installed in
z
The battery must be inserted in
the negative (-) cap facing the battery compartment.
z
The cushion (copper color) of
the battery is still located inside
the barrel cover. In
Barrel Cover
position unless it is improperly
removed.
z
The barrel cover is screwed tightly onto the barrel of the pen.
z
Once the battery inside the digital pen has been used for a long
time, it should be replaced with a new one.
z
If you just replace an ink cartridge of the pen, plea
new cartridge tip firmly against a hard surfac
place.
Please verify that the thickness of paper is under the writing
35
