59
FCC compliance information
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC
RULES.
OPERATION IS SUBJECT TO THE FOLLOWING
TWO CONDITIONS:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, in
cluding interference that may cause undesired operation.
Note:
This equipment was tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a re
sidential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is encou
raged to try to correct the interference by one or more
of the following measures:
»
Reorient or relocate the receiving antenna.
»
Increase the separation between the equipment and
receiver.
»
Connect the equipment into an outlet on a circuit dif
ferent from that to which the receiver is connected.
»
Consult the dealer or an experienced radio/TV tech
nician for help.
»
Modifications not expressly approved by the manu
facturer may void the user‘s authority to operate the
equipment under FCC rules.
