background image

                                                                      

 

Powerful Voltage:

 

This generator produces powerful voltage, which can result in electrocution.

 

• ALWAYS ground this generator before using it. (See “Ground the Generator” section in this manual). 

• Only electrical devices should be plugged into this generator, either directly or with an extension cord. NEVER 
connect a building electrical system to this generator without a qualified electrician. Such connections must isolate 

generator power from utility power and comply with local electrical laws and codes. Failure to comply can create a back 

feed into utility lines creating an electrocution hazard, which may result in serious injury or death to utility workers. 

Such a back feed may cause this generator to explode, burn and create fires when utility power is restored. 
• Use a ground fault circuit interrupter (GFCI) in highly conductive areas such as metal decking or steel work. GFCIs 

are available in-line with some extension cords. 

• Do not use this generator in wet conditions (rain, snow, active sprinkler system, wet hands, etc.). Always keep this 

generator dry and operate it with dry hands. 
• Do not touch bare wires or outlets (receptacles). 

• Do not allow children or non-qualified persons to operate this generator. 
  

                                                                      

 

High Temperatures:

 

This generator produces heat when in operation. Temperatures near the exhaust can 

exceed 150 Degrees Fahrenheit (65 Degrees Celsius).

 

• Do not touch hot surfaces. Observe all warning placards on this generator denoting hot surfaces. 

• Allow this generator to cool for several minutes after use before touching the engine, muffler or other areas that are 

hot during operation and before storing indoors. 

• Hot exhaust may ignite some materials. Keep flammable materials away from this generator. 

• Keep at least several feet of clearance on all sides of this generator during operation. Do not enclose this generator in 
any structure. 
 

                                                                      

 

Usage:

 

Misuse of this generator can damage it or shorten its life.

 

• Use this generator only for its intended purpose. 
• Operate this generator only on a dry, level surface. 

• Allow this generator to run for several minutes before connecting any electrical devices. 

• Promptly turn off any malfunctioning devices and disconnect them. 

• Do not operate an excessive number of electrical devices in excess of the wattage capacity of this generator. 
• Do not turn on electrical devices until 

after 

they are connected to this generator. 

• Turn off all connected electrical devices before stopping this generator. 
 

 

Model AC-G0002 3500 Surge Watts / 3000 Running Watts Portable Generator 

6

 

Summary of Contents for AC-G0002





































Reviews: