Installation & Operation Manual
- Model VTS
Contents of this Manual are Subject to Change Without Notification
Page 19
6.5.7 Dashboard Menu
SYSTEM
Load
➢
From Transmitter Flash Memory:
This will
load the contents of the
transmitter nonvolatile FLASH memory into the transmitter RAM memory.
➢
From File:
This will open a window that will enable you to select a
configuration file from a computer hard drive or other nonvolatile storage
device connected to the computer and load it into the transmitter RAM
memory.
➢
Restore Factory Defaults:
This will reset the transmitter configuration to the
original settings as shipped from the factory. The current configuration
settings will be replaced.
Save
➢
To Transmitter Flash Memory:
This will save the contents of the transmitter
RAM memory to the transmitter nonvolatile FLASH memory.
➢
To File:
This will open a window that will enable you to save the
configuration parameters to the computer hard drive or other nonvolatile
storage device connected to the computer.
Retrieve Generic Configuration Files from the Cloud (Downloaded w/ Insight)
➢
If connected to the internet, this command will bring you to the Accutrol
Cloud where configuration files can be retrieved.
➢
Parameters Report:
Generates a report showing the present configuration
parameters of the transmitter.
➢
Balancers Report:
Shows the transmitter configuration parameters most
relevant to the Balancer.
Exit
➢
Closes the Insight Program
