Installation & Operation Manual - Model AV3000
Contents of this Manual are Subject to Change Without Notification
Page 17
9.1.1 Rectangular Valve Access Cover
Equipment Required:
5/16
” socket with ratchet drive or power driver,
safety glasses
and
safety gloves
suitable for sheet metal working.
1. The access cover is secured to the valve using (12) Tek-Screws. Remove the (12)
Tek-
Screws using a 5/16” socket and put the screws aside for reinstalling the cover
later.
2. Remove the access cover from the valve.
3. Once the cover is removed the sensors are accessible for inspection.
4. When inspection is complete, place the access cover in position and secure using
the (12) screws previously removed.
Access Cover
Remove (12) Screws
Inspect Sensors
