11
By holding down the right rotary control, the countdown counter counts from 8 to 0, whereby the volume
is continuously increased until the switch is made from
"U0" to "U1".
If you release the rotary knob within
the count down cycle, the unity gain setting is canceled.
If the display shows "U1", the volume control for the previously selected input is bridged. The volume
setting of the previously selected input is now bypassed and the next time it is selected, it becomes the
press the volume button, the volume setting is temporarily
reactivated. As soon as the input is changed once and you select the "UNITY GAIN input" again, the
volume setting is bypassed again.
To deactivate the "UNITY GAIN" setting, call up the Unity Gain menu "5" in the menu again and briefly
press the volume button once. The display then changes from "U1" to "U0" and the standard mode is
restored.
DANGER! To avoid damaging your speakers, you should be absolutely certain that you have selected the
correct input for this setting when using the "UNITY GAIN" setting.
Turning the left rotary knob to the right takes you to the next settings menu, turning it left to the menu in
front of it.
6. Level adjustment
In this menu, you can adjust the level by + -12dB for each input, to avoid gross volume jumps when
switching between the inputs.
The right knob first selects the input you want to level. Then press the right-hand rotary knob and then
adjust the level by turning the rotary knob. Press the rotary knob again to return to the input selection.
Turn the right knob to select the next input whose level you want to set. Now press the rotary knob again
and adjust the level for this input. Press the knob again to go back to the input selection. Now you can
turn the right knob to select the next input, and so on.
By turning the left knob to the right you will reach the next setting menu, by turning to the left in front of
the menu.
7. Headphone output on-off
By pressing the right knob, the headphone output can be switched on (1) or off (0).
By turning the left knob to the right you will reach the next setting menu, by turning to the left in front of
the menu.
8. Speaker output On-Off
By pressing the right knob, the loudspeaker output can be switched on (1) or off (0). Use this function to
switch off the speakers when you want to listen to headphones alone. When the speakers are switched
back on, the initial volume is also set to the value set in # 2. To avoid unexpected volume jumps.
By turning the left knob to the right you will reach the next setting menu, by turning to the left in front of
