BMI (Body Mass Index) Reading
1. Step on the scale and remain still.
2. When a stable weight is reached, the display will beep and hold the weight reading.
3. Press the BMI button.
4. The display will prompt you to enter your height in Ft-In
5. To change the value of the flashing digit, press the left/right arrow buttons. Press the
ENTER button to accept each digit. After height and weight are entered, press the BMI
button to accept the correct height.
6. When BMI is pressed to accept the proper height, the BMI value will be displayed.
ZERO Button
1. Press the ZERO button.
2. 0.0 will display after the scale becomes stable.
REWEIGH Button
1. Use the REWEIGH button to reinitiate a patient weighing, without having to remove the
patient from the scale platform.
Power Supply
The scale is generally powered by the supplied AC-Adaptor. 4-AA batteries can be used
as a
power back-up
and will supply enough power to power the scale for 7 days.
– Carefully lower scale to flat position on floor so that the bottom of the base is accessible.
– Push the battery compartment closure towards “Battery” and open the cover.
– Install the 4-AA batteries.
– Close the cover. After installing batteries carefully lift scale unit back into the upright position.
The AC connection socket for the main unit is in the rear of the column base of the scale.
Battery Indicator
The battery indicator displays the remaining battery life available.
Summary of Contents for HRS305
Page 1: ...HRS305 Hand Rail Scale ...
