1
Before installing the enclosure panels, make sure the hood is hung in position with all the ductwork
attached and electrical connections completed.
1. Position the end enclosure panels on the hood, and clamp into place with clamps provided or tack-
weld the panels into place (Fig 19).
. Fasten the end enclosure panels to the wall, method depends on wall construction. (fasteners are
not provided)
If the hood is a double island, bolt the end enclosure panels together. (fasteners are not provided)
3. Position the front enclosure panel(s) on the hood, and bolt to the end enclosure panels with the
5/16 in. bolts provided in the hardware package.
4. Tack-weld or clamp the front enclosure panel(s) to the hood. If clamps are used, they must be
positioned 4 in. (100 mm) from the ends, and in the center of the front enclosure panel.
5. To allow for ease of cleaning, caulk the external seams with NSF Approved silicone caulk
(GE SCS1009, or its equivalent). The caulk is not provided.
6. Installation instructions may not be applicable for concrete ceilings.
Fig. 19
Installing Enclosure Panels
