17
STEP 1
Attach pads to
the lead wires
Take the pads out of the
sealed package. Insert
the lead wire pin into
the electrode connector.
Make sure there are no
bare metal pins exposed.
STEP 2
Insert lead wires
into the TENS unit
Hold the lead wire plug
and insert it into the
socket on the top of the
stimulator, as shown by
the graphic to the right.
STEP 3
Pad placement
Remove the clear
plastic film from the
pack of the pads. Place
pads on clean, dry and
healthy skin, near or
surrounding the pain at
least 2 inches apart, and
do not let them touch. The red lead wire connector
denotes the (+) positive electrode and the black
lead wire connector denotes the (–) negative
electrode. For best results, before beginning
treatment, make sure the positive (+) electrodes
and (–) negative electrodes are placed exactly as
illustrated on pages 18-19 for single channel and
pages 20-21 for dual channels, or refer to the
enclosed Electrode Placement Guide. Be sure
there is a linear path between the pads.
EASY STEPS TO START YOUR THERAPY WITH ELECTRODE PADS
1
2
3
