ACCURAT SOLID 1500, Instruction Manual

Page: 45 / 48

43
Safe Operation of the Powerstation
• Please use the Powerstation only within the specified operating tem-
perature range. Exceeding or falling below this can impair performance,
damage the battery and endanger operational safety.
• The Powerstation is not waterproof. Please avoid contact with water and
high humidity.
• Continuous operation of high power consumers may cause overheating
and trigger overtemperature protection. Should this happen, please wait
at least 30 minutes afterwards, preferably one hour, until the next use or
charge.
• Only clean the Powerstation with a dry, abrasion-resistant cloth.
Charging the Powerstation
• The Powerstation may only be charged with the supplied or approved
charging cables. We accept no liability for damage caused by the use of
non-approved accessories.
• During charging, please place the Powerstation on a flat surface at a
safe distance from any flammable or explosive material. Please do not
leave the Powerstation unattended during charging.
• If the temperature of the device increases after intensive use, it is
strongly advised to wait until the Powerstation has cooled down to room
temperature before starting to charge it. The optimum temperature
for charging is in the range of 22°C to 28°C. Charging exclusively in
this temperature range can significantly increase the battery life. The
permissible ambient temperature is a minimum of 0°C and a maximum
of 40°C.
Storage and transport of the Powerstation
• Please keep the Powerstation out of the reach of children. If a child
swallows a small part, consult a doctor immediately.
• Please charge the device before storing it for a long period of time.
Prolonged storage at a low charge level may affect battery performance
and life or even damage the battery. During long periods of inactivity