2
Notes
●
For connection between the DAC-10 and digital equipment, use a 75-ohm coaxial cable or
optical fiber cable.
●
For analog input/output connections, use shielded audio cables and take care not to mix up
left and right channels.
●
Do not make connections to a component with balanced and unbalanced cables at the
same time. Otherwise ground loops may occur, which can cause noise.
CAUTION：
Before making connections, be sure to switch
the power to all components off.
CONNECTIONS
●
This set relies on cooling with a natural flow of air between the ventilation
holes on the top and bottom. When installing the set, leave at least 10 cm of
space at both sides, the top and the back to allow for normal ventilation.
●
Do not place any object containing liquid (vases, flower pots, bottles with
cosmetics or chemicals, etc.) on top of the unit. If a spill occurs, there is a risk
of fire and electric shock.
●
If there is a problem with the unit or if malfunction occurs, always disconnect
the power cord from the AC outlet! This is absolutely essential, because simply
setting the power switch to OFF will not completely separate the unit from the
AC source.
WARNINGS
Option board installation example shown in illustration
●
OPTION: Digital Input Board
［
DAC-10
］
model DAC-10
DIGITAL
INPUTS
COAXIAL
OPTICAL
DIGITAL OUT
STEREO
MHZ
CH
MEMORY
SELECTIVITY
METER
NORMAL
SIGNAL
mm
B
compacr disc player
DP-65V
ANALOG OUT
STEREO
MHZ
CH
MEMORY
SELECTIVITY
METER
NORMAL
SIGNAL
0 1 2 3 4 5
fm stereo tuner
model T-109V
output level
1
2
3
4
5
6
7
8
9
10
0
station
LINE IN
LINE OUT
STEREO
MHZ
CH
MEMORY
SELECTIVITY
METER
NORMAL
SIGNAL
Audio cables with
RCA-type plugs
Balanced
cables
CD player
Use shielded cables for audio
connections (2-conductor
shielded cables for balanced
connections).
＊
ANALOG
OUTPUTS
Recorder
Optical fiber
cable
75-ohm coaxial
cable
CD player, DAT recorder,
MD recorder, or other
digital component
See "Option Boards"
for more information
on this connection.
Tuner
Speakers
Left
Right
＋
−
＋
−