HDG-4000 HD/SD/DVI COMPONENT VIDEO CALIBRATION GENERATOR USER MANUAL
11
Misc
Info
– Serial number, levels, and options information.
Com Ports
(See HDG-4000 Serial Interface Manual for details)
RS232 Baud
– Baud rate selection.
USB Baud
– Baud rate selection.
RS232 Flow
– Flow control selection.
RS232 Flow
– Flow control selection.
Defaults (Power up)
60/50 Hz
– Power up in 60 Hz or 50 Hz mode (HDG-4000 L2 only).
RGB Sync
– Power up analog RGB signals with SoG, or Positive or Negative HV
sync.
CVBS/YC
– Power up with 0 IRE or 7.5 IRE setup for NTSC (480i) CVBS and Y/C
signals.
RS232
Baud
– Power up baud rate.
USB Baud
– Power up baud rate.
User Format
– Power up with front panel User Format set to select 1080p24sf,
1080p30, or 1080p48.
Save Items
– Save all of the above power up defaults.
Selected Remote Control Functions
Please read the HDG-4 Remote Control manual for a complete discussion of
additional remote control features including how to enter User Luma & Color
Levels, and User Pattern Lists.
Edge
- Selects Fast or Slow analog video edge transitions. The Slow Edge mode
changes the edge transition rate of the HDG-4000 analog signals to a rate chosen
specifically for each video format. The Edge mode only affects analog signals. It does
not affect the digital video output. The currently selected Output LED will blink slowly
when the Slow Edge mode is enabled.
ALT Gray Scale
– Press this button combination to select or alternate between 0%-
10% Low-GS (Gray Scale) patterns and 100%-109% High-GS patterns. Press the
Gray Scale button only to return to the 0%-100% Gray Scale patterns. The Gray Scale
LED will blink slowly when the Low-GS or High-GS mode is enabled.
Note: 100%-109% patterns are not available for digital RGB-PC signals because the
maximum signal amplitude is 100% (digital 255) for RGB PC signals.
Mute
- This button produces a 0% black field. Press any button on the remote control
(including Mute) to restore the previous pattern.
