HDG-4000 HD/SD/DVI COMPONENT VIDEO CALIBRATION GENERATOR USER MANUAL
9
On Screen Display (OSD)
Systems
Pattern Information
Info
– Each time a pattern is changed the name of the pattern, which includes important
signal identification information, is displayed on-screen for approximately one second.
Press the Info button on the remote control to display the pattern information
continuously. Press the Info button again to resume the default display period.
OSD Menu System
The OSD Menu is produced by all analog and digital outputs, for all signal formats. The
OSD Menu provides additional features such as user definable luma values and colors,
access to advanced signal parameters, communications port control, and the ability to
specify generator power-up default modes.
OSD Menu Navigation
Press the Menu button to display the OSD window, which is organized into three
columns. The left column of the OSD window currently lists six menus – User Level,
Output, Sync, Misc, Com Ports, and Defaults. Use the cursor keys to highlight the
desired menu, and then move into the middle column and highlight a menu item. The
current status of each highlighted menu item is shown in the right column. To change a
setting move into the right column and highlight one of the alternative settings that will
then be listed in that column. In most cases it is not necessary to press the Enter key
unless “Enter” appears in the right column. In that case highlight “Enter” and press the
remote control Enter key to proceed.
Press the Menu button to turn the OSD menu on or off.
The highlighted cursor position in the OSD menu is
maintained when the menu is turned on or off, so it is
easy to turn the menu off when making measurements
or adjusting a calibration setting, and then turn it back
on again to make additional changes to the same
menu item.
