8
Wiring Diagram
The following shows two typical wiring input configurations:
Please refer to Acuvim-L user's manual section 2.3 for other wiring configuration
details.
Settings Mode
Meter Settings
Press V/A and H together to enter the meter setting screen. Press “H” to move the
flashing cursor to the right, press “P” to decrease the number by 1 once a time, press
“E” to increase the number by 1 once a time, press “V/A” to accept the change and
move to the next screen. Before accessing the parameter setting mode, a four digit
password is required every time. The default password is 0000. The below fig would
show the pass page.
3 phase 4 wire(3LN, 3CT)
3 phase 3 wire(2LL, 3CT)
